Configure H2O Wireless iPhone MMS Settings

Odoo CMS - a big picture

Solution 1: Turn off your iPhone, Insert the H2O Wireless SIM Card to your iPhone then turn your phone back on. This should reset your configuration to H2O Wireless automatically.

Solution 2: If you still are not able to send or receive MMS then reset the network settings and then turn your iPhone off and then turn it on. This should reset the configuration to H2O Wireless.

Settings -> Mobile Data -> Mobile Data Options -> Mobile Data Network -> Reset Settings -> Select Reset

Solution 3: If the above 2 solutions do not work then follow the below Manual set up

  1. Tap Settings
  2. Tap Mobile Data / Cellular Data
  3. Tap Mobile Data options / Cellular Data Options (*For some operators this cellular data options should be disabled)
  4. Select Mobile Data Network / Cellular Data Network
  5. Go to MMS Section,
  6. Under  MMS Section, in the APN field, enter Prodata
  7. Tap return
  8. Under MMS Section, in the Username, enter none
  9. Tap return.
  10. Under MMS Section, in the Password, enter none and press OK
  11. Tap return
  12. Under MMS section, in the MMSC field, enter http://mmsc.mobile.att.net
  13. Tap return
  14. Under MMS section, in the MMS Proxy, enter proxy.mobile.att.net
  15. Tap return
  16. Under MMS section, in the MMS Max Message Size, enter (Value not found)
  17. Tap Back icon

The new MMS profile is now configured and ready to use

Leave a comment

You must be logged in to post a comment.